Clock/Sleep Timer
English
Clock setting
The clock uses the
1In standby mode, press PROG/CLOCK for more than two seconds.
➜ The clock digits flash.
2Press ALBUM/PRESET 3 4 to set the minutes.
3Press S/T to set the hours.
4Press PROG/CLOCK to confirm the time.
Setting the Alarm Time
●Wake up to FM radio or music from your USB device or iPod. The clock time needs to be set first before the alarm clock can be used.
1Press ALARM for more than two seconds to enter the alarm setting mode.
➜The alarm activated icon 
appears.
➜The alarm clock digits flash.
➜"Error" appears briefly if you have not set the clock time.
2Press ALBUM/PRESET 3 4 to set the minutes.
3Press S/T to set the hours.
4Press iPod, TUNER or USB/AUX to select the sound source.
5Press ALARM to confirm your alarm setting. ➜ The display returns to the clock time.
Notes:
The TUNER mode is the default source if:
–Your USB device contains no MP3 or WMA files.
–You forgot to connect a USB device.
–You forgot to dock your iPod.
Stopping the alarm
●To repeat the alarm at 9 minute intervals, press REPEAT ALARM on the set.
➜ You can repeat this up to a maximum of 6 times consecutively. Your alarm will then stop and reactivate at the same time next day.
●To cancel the alarm before the set time, press
ALARM in standby or playback mode.
➜ Display shows if activated, and disappears if deactivated.
●To select the
alarm will reactivate at the same time next day.
Sleep timer setting
The sleep timer enables the system to switch off by itself after a set period of time.
1Press SLEEP on the remote control repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF…
➜
is displayed.
2To review the remaining sleep time, press
SLEEP .
20
