Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
»» The alarm repeats ringing minutes later.
Tip
•• You can press 
/ 
to adjust the interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the corresponding ALM 1 or ALM 2.
»» The alarm stops but the alarm settings remain.
View the alarm settings
1 Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1 Press SLEEP repeatedly to select a set period of time (in minutes).
»» When the sleep timer is activated, the display shows 
, and the volume will gradually decrease in the last 5 minutes.
To deactivate sleep timer
1 Press SLEEP repeatedly until [OFF] (off) is displayed.
»» When the sleep timer is deactivated, 
disappears on the display.
Adjust display brightness
1 Press BRIGHTNESS/REP ALM repeatedly to select different levels of display brightness.
7 Adjust sound
Adjust volume level
1 During play, press VOL +/- to increase/ decrease the volume level.
Mute sound
1 During play, press MUTE to mute/unmute sound.
Select a preset sound effect
1 During play, press DSC repeatedly to select:
•[POP] (pop)
•[JAZZ] (jazz)
•[CLAS] (classic)
•[ROCK] (rock)
•[FLAT] (flat)
Enhance bass
1 During play, press DBB to turn on or off dynamic bass enhancement.
»» If DBB is activated, [DBB] is displayed.
16EN
