Disconnect a device

1Press and hold for more than 5 seconds

To disconnect, you can also turn off the connected device or move it beyond the communication range.

The Bluetooth indicator turns off.

Re-connect a previously-connected device

Tip

For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this unit, it re-connects automatically.

1

2

Turn on the main unit.

On the device, set up the Bluetooth connection:

aEnable Bluetooth to search for other Bluetooth devices. (Refer to the device user manual on how to enable the function.)

bWhen “ PHILIPS DC350” is recognized and displayed, select it to start to connect.

3Wait until the Bluetooth indicator turns on. » Re-connection is completed.

Receive a phone call

Note

You can receive phone calls through this unit with devices that support the HFP or HSP profile.

1Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21)

2When a call is received, you hear the incoming call alert tone. Press PAIRING to accept the call.

To reject the call, press .

3Speak into the MIC located on the front panel.

To increase or decrease the volume, press VOL +/-.

To mute the microphone, press MUTE.To unmute, press this button again.

To select to hear the audio from the device or from the main unit, press

PAIRING .

4Press to end the call.

22EN

Page 21
Image 21
Philips DC350/37 user manual Receive a phone call, Disconnect a device, Re-connect a previously-connected device