Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
» When the sleep timer is activated, the display shows 
.
To deactivate sleep timer
1Press SLEEP repeatedly until [OFF] (off) is displayed.
» When the sleep timer is deactivated, 
disappears on the display.
Adjust display brightness
1Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
•Bright.
•Dim.
•Off.
9 Product information
Note
•Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power | 2X3W RMS |
Frequency Response | 125Hz - 16kHz, ±3dB |
Signal to Noise Ratio | >55dB |
Aux Input | 0.6 V RMS 10kohm |
E n g l i s h
EN 25
