Connect power
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
Before connecting the AC power cord, ensure you have completed all other connections.
Connect the power cord to:
the AC~MAINS jack on the back of the main unit.
the wall outlet.
2Insert 2 AAA batteries with correct
3Close the battery compartment.
a
b
c
English
Note
If you are not going to use the remote control for a long time, remove the batteries.
Do not use old and new or different types of batteries in combination.
Batteries contain chemical substances, so they should be disposed of properly.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
To insert the remote control battery:
1Open the battery compartment.
Set clock
1In standby mode, press and hold PROG/
for more than two seconds
to activate the clock setting mode.
»The 12 hour or 24 hour format is displayed.
2Press 
/ 
to select 12 hour or 24 hour format, and then press PROG/
.
»The hour digits are displayed and begin to blink.
EN 11
