Handsets registering / unregistering | Philips DECT 211 instruction

Handsets registering / unregistering (

)

4 handsets can be registered to the base station. A handset can only be associated with 1 base station.

✦ To register another handset

First enter registration mode by unplugging and plugging back in the power adapter to the electricity supply.

Once the menu is selected, enter the RC* code written under the base and press to confirm.

Warning : If you wish to associate a non-Philips handset to the DECT 211 or DECT 215 base stations, make sure that these handsets are GAP compliant otherwise they will not operate properly.

✦To unregister the handset you use

enter the RC code*

✦To unregister all the handsets (except the handset you are using)

enter the RC code*

Warning : Once unregistered, the handset is no longer operational.

Technical settings (country dependent)

*RC code (Registration Code) is written under the base.

If your network operator is not the main national network operator, you may have to change the line settings. Some of the following settings are available subject to a subscription with your operator and also technical availability.

The options on this menu are country dependent and some may not exist in certain countries.

To enter the following settings :	or
	To scroll through the menus

Press to exit the programming option.

✦Changing Caller Identification type

The Caller Identification service (Name and Number) is available subject to a subscription to your operator (according to availability). (Country dependent)

or to choose the right setting among the list

✦Changing the dial mode

This allows you to select either DTMF tone dialling (faster dialling, access to operator services) or pulse dialling (also called “Loop disconnect” and used in countries without DTMF capability).The default value is TONE. (Country dependent, you may not be able to change to “Pulse”).