Philips DECT 211 manual Installing your telephone, Code

Models: DECT 211

1 20
Download 20 pages 52.8 Kb
Page 3
Image 3

Installing your telephone

Inserting / Replacing battery pack / Telephone connection

Warning: To insert battery pack and /or to connect your telephone, please refer to the drawings printed on the inside cover.

With the help of the installation drawings :

1.- Plug the line cord (A) into the line socket on your DECT 211 or DECT 215 base station. Plug the power cable (B) into the power socket on your DECT 211 or DECT 215 base station. Plug the power supply unit into the wall socket.

Connect the telephone line cord into the wall socket.

2.- Open the battery door on the handset by sliding it down.

3.- Connect the battery pack to the connector inside the handset. Place the battery pack with sticker face up and wires along the left side of the battery pack.

4.- Replace the battery door.

5.- Put the handset on the base and charge for 24 hours before use.

Charging / Recharging the telephone (See battery status icon on page 4.)

On first use or when inserting a new battery, charge the battery with the handset for at least 24 hours. This ensures optimal battery life reached after 3 cycles of charge/uncharge. The battery needs to be charged if you hear a beep when using the telephone.

The battery life is about 300 hours in stand-by time and 18 hours in communication.

Configuring the phone for use

Don’t change your configuration code if you live in UK or Northern Ireland. Your product is already factory configured with the right settings.

Country

Northern Ireland

UK

Warning : This product is ONLY designed to be used in countries LISTED below.

Code

44

44

Warning : If you live in the country in the table below, you must enter the relevant configuration code using the key sequence shown followed by your country code.

Rep. of Ireland

153

For Example to configurate for Republic of Ireland :

dial 153

Advice : If you have bought your product in any of the above countries but want to use it in another one, you can enter the configuration code, according to the above tables, in order to activate the right country settings. Nevertheless, you have to change the telephone line cord adapter according to the country where you want to use it.

www.philips.com/faqs/dect

1

Page 3
Image 3
Philips DECT 211 manual Installing your telephone, Code, For Example to configurate for Republic of Ireland Dial