Philips DSR 300/00, DSR 310/00 7.7 Installation

7.7 Installation

The Installation sub-menu includes the following items:

o Antenna Setting

o Add Service

o Signal Test

o Product Identifier

o Factory Default

o Software Update.

7.7.1 Antenna Setting

This feature is used to set the antenna settings.

- Select Antenna Setting from the Installation menu to

access the Antenna Setting screen.

Note: access to this menu can be protected by Pin Code.

- Select appropriate values for the following:

• Port: up to 4 ports

Note: this item is used to configure the DiSEqC option for

multiple LNBs.

• Satellite: select the appropriate satellite using arrow

keys.

• LNB Type: select your LNB type. If you use an universal

LNB, select Universal (default value).

• LNB Freq. 1:set automatically according to the satellite

and LNB Type selected. If you have a dual LNB, enter

the proper value in the value box.

• LNB Freq. 2: set automatically according to the satellite

and LNB Type selected.

• 22KHz Tone: select the switches with which you want

to configure the antenna.

- To exit the Antenna Setting screen, press the <BACK> key

of the remote control to finish antenna setup.The message

“Are you sure you want to change the configuration of

Antenna setup?” is displayed.

- Select the <OK> button on screen and then wait for the

data to be saved.

English

MENU 31

Doc_DSR300.qxd 29/11/04 13:19 Page 31

Contents

Main Safety instructions Meaning of symbols Quick installation guide AB TABLE OF CONTENTS Page 1 Introduction 2 Product description 2.1 Unpacking the product 2.2 Front panel Q W E R 2.3 Rear panel WI T Q E R U Y 10 REMOTE CONTROL 3 Remote control Page 4 Connecting your receiver Warning! 4.1 Connecting to a Satellite Antenna and a TV 4.2 Connecting to a TV and a VCR/DVD player using the SCART Support 4.3 Connecting to a Digital Amplifier/Home Theatre/HiFi system AB 5 First installation 5.1 Menu language and port selection 5.2 Channel scanning 5.3 Scanning failure 5.3.1 Antenna Setting 5.3.2 Signal test 6.1 Receiver wake up 6.2 Channel Information 6.3 Channel selection 6 General Viewing Function 6.3.2 Using the channel list 6.4 Channel lists 6.5 TV or Radio Mode selection 6.6 Volume & Audio Control 6.6.1 Volume control and Mute 6.6.2 Audio Control 6.7 Recording timers 6.7.1 To set a timer from the guide 6.7.2 To set or modify a timer from the Timer menu 6.7.3 To delete a running timer while watching digital TV or listening to digital radio 6.7.4 To delete a running timer set while the receiver was in standby 7 Menu 7.1 General information 7.1.1 Basics about menu navigation 7.1.2 Cancel/Store changes 7.2 Guide (Electronic Programme Guide) 7.3 Channel Manager 7.3.1 Channel Pool 7.3.2 Favourites 7.4 Parental Control 7.4.1 To enable Menu Lock 7.4.2 To set the Parental Rate 7.4.3 To change your receiver's Pin Code 7.5 Timer Manager 7.5.1 Recording timer 7.5.2 Reminder 7.5.3 Sleep timer 7.6 Setup menu 7.6.1 Time Setting 7.6.2 System Setting 7.6.3 Remote Control setting Page 7.7 Installation 7.7.1 Antenna Setting 7.7.2 Add Service 7.7.3 Signal Test 7.7.4 Product Identifier 7.7.5 Factory Default 7.7.6 Software update 34 MENU TREE 8 Menu tree Page 36 TROUBLESHOOTING 9 Troubleshooting Symptom Cause Remedy TROUBLESHOOTING 37 Symptom Cause Remedy