Tune to DAB radio station manually
1In DAB mode, press / repeatedly until your desired station name displays.
2Press ENTER to confirm the selection.
»»The radio immediately tunes to the selected station.
•About station display symbols
You probably see some symbols displayed before the station names as follows:
•H: Indicates that the station is one of
10
•?: Indicates that the station is not currently available, or not active.
• : Indicates that the station is a primary station with secondary service.
• : Indicates that the station is a secondary station.
Program DAB radio stations manually
You can program a maximum of 30 preset DAB radio stations.
1Tune to a DAB station.
2Press PROG on the remote control to activate programming.
3Press / on the remote control to allocate a number
4Press PROG to confirm.
Note
•• If a DAB station is already stored under a preset location, new DAB station assigned to this location will overwrite the old DAB station.
•• DAB station presets will not overwrite FM presets.
Scan for new DAB stations
New stations and services will be regularly added in the DAB broadcast.To make new DAB stations and service available on your DAB radio, a search is needed.
1In DAB mode, press SCAN.
»»The unit starts to scan for DAB stations.
Listen to a preset DAB radio station
1Press / to select a preset number on the main unit.
Display DAB information
On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station. Seven types of service information are available.
1Press RDS/DISPLAY repeatedly to cycle through the display information (if available).
»»Dynamic label segment (DLS)
»»Program type (PTY)
»»Ensemble Name
»»Time
»»Channel and frequency
»»Bit rate and audio status
»»Signal error rate
Use DAB menu
1In the DAB mode, press MENU to enter the DAB menu.
»»The first setup option [Station list] displays.
2Press / to scroll the menu options:
• [Station list]
• [Full scan]
• [Manual tune]
14EN