Onkyo TX-SR804E Displaying XM Radio Information, Positioning the XM Antenna, Setup closes

TX-SR804/804E_En.book Page 55 Monday, September 4, 2006 9:34 AM

Listening to the Radio—Continued

Displaying XM Radio Information

Press the [DISPLAY] button repeatedly to cycle through the available information.

Channel name

The following information is displayed:

1.Channel name

2.Channel number & Preset number

3.Category name (CAT)

4.Artist name (NAME)

5.Song title (TITL)

6.Listening mode

Note:

•If the category, artist, or song title is not available, “- - -” will be displayed instead.

■Displaying XM Radio Information on Your TV

When you select a different XM channel, or the artist or song title changes, the following information is dis- played on your TV for 3 seconds.

XM 050 5ch

CHANNEL: Channel name

CAT: Category name

NAME: Artist name

TITLE: Song title

Tip:

You can display this information at anytime by pressing the [DISPLAY] button.

■XM Radio Messages

The following messages may appear while using XM radio.

CHECK ANTENNA

The XM Mini-Tuner and Home Dock is not connected properly. Check the connection.

UPDATING

The XM user encryption code is being updated. Please wait.

NO SIGNAL

The signal is too weak. Check the XM Mini-Tuner and/or antenna connection and reposition it for the best reception.

LOADING

The main unit is tuning or decoding audio or text data. Please wait.

OFF AIR

The XM channel you selected is not currently broadcast- ing. Select another channel.

Positioning the XM Antenna

You can check the signal strength of the XM Radio sig- nal and adjust the position of the XM antenna accord- ingly.

1 RECEIVER Press the [RECEIVER] button,

followed by the [SETUP] button.

2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Input

Setup,” and then press [ENTER].

ENTER

3	Use the Up and Down [ ]/[ ]
	buttons to select “3. XM Antenna
	Aiming,” and then press
	ENTER
	[ENTER].
4	Adjust the position of the XM
	antenna so that the Satellite sig-
	nal strength bar is as long as
	possible.
	4-3.Antenna Aiming
	---------TUNER----------
	a.Satellite
	[ --------------------	]
	b.Terrestrial
	[------------------------------	]

If you can’t receive a “Satellite” signal, adjust your XM antenna so that the “Terrestrial” signal strength bar is as long as possible.

Terrestrial signals are only available in certain areas. So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terres- trial reception.

Press the Down [ ] button to display the “Terrestrial” signal strength bar on the display.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

55