Philips DTX6372 user manual Connecting to Your Hifi, Inserting Your Smartcard

9.Switch your TV to all other tuned channels, including that tuned for your video, and check the picture quality. If there is no interference, go to chapter 6.

If there is any interference, continue as follows:

-Disconnect your aerial from the back of the receiver.

-Make sure that your TV is on the channel you have tuned for watching digital programmes

-If you have the welcome message on-screen, press the SELECT button on your remote. You will now see the main menu screen.

-From the main menu, select option 4 viewing preferences, option 2 tv and video settings and then option 6 uhf channel number.

The current setting for this option is 38, which needs to be changed if you are experiencing interference. To do this, use the number buttons to enter a new uhf channel number. Choose one that is significantly different from 38. Press the RED button (back) to move back a screen and store your setting.

-Repeat previous steps from step 6 Tuning your television to see if the picture improves. When you are satisfied with the picture, continue to chapter 6.

4.3 CONNECTING TO YOUR HIFI

Please refer to your HIFI’s instruction book should you require further information.

DIGITAL TERRESTRIAL RECEIVER

TV

LEFT

RIGHT

TV

MODEM	SERIAL	AUDIO	VCR	AERIAL	CH 21-69
			COMMON INTERFACE

4.4 INSERTING YOUR SMARTCARD

In order to watch ONdigital channels your viewing smartcard needs to be inserted in the smartcard slot on the front of your digital receiver.

Remove the smartcard from the ONdigital envelope supplied with your receiver and insert into the smartcard slot on the front of the receiver. You should have the ARROW facing forwards into the box and the GOLD CHIP facing upwards. Push the card into the slot as far as it will go, the end will be visible outside of the slot.

9