11 PROGRAMMING THE REMOTE FOR YOUR TV AND VIDEO

Your remote can control different major-brand televisions and video’s.

Initially your remote is programmed for Philips-brand televisions and video’s. If you have different brands, follow the instructions below to set up your remote.

TV brand Setup

This applies to the TV only.

1.Turn on the television you wish to control.

2.Locate the -aand P+ buttons in the TV section of the remote control (as shown below).

3.Simultaneously press both of these buttons for at least 4 seconds.

4.Enter the 3 digit code for the TV (found on pages 32 and 33).

5.Aim the remote at the TV and press the OFF button located in the TV section. The television should now go to standby.

6.If the TV does not go to standby, repeat steps 2-5, trying each code listed for your brand of TV.

VIDEO brand Setup

This applies to the video only.

1.Turn on the video for which the code needs to be identified.

2.Press and hold the “G and F” buttons simultaneously on the RC for a minimum of 4 seconds.

3.Enter the 3 digit code for the video (found on pages 33 and 34).

4.Aim the remote at the video and press the yellow B button (keep the side button pressed when the yellow B button is pressed). The video should start playback.

5.If the video does not start playback, repeat steps 2-4, trying each code listed for your brand of video.

Resetting your remote

If necessary the remote can be reset to the factory default clearing all the pre-programmed codes.

TV OFF and B are pressed simultaneously for at least 4 seconds. This restores the remote to the factory setting.

Changing batteries

When changing batteries in your remote, programmed codes will only be remembered for one minute. Be careful not to press any button when changing the batteries as this will also reset your remote.

All manufacturers are concerned about the constant improvement of their products. Although the RC 2580 remote is compatible with most of the equipment of the following brand list, Philips cannot guarantee its operation with the complete range of products on the market.

31

Page 31 Page 33
Page 32
Image 32
Philips DTX6372 user manual Programming the Remote for Your TV and Video, TV brand Setup
Page 31 Page 33

DTX6372 specifications

The Philips DTX6372 is a versatile and innovative set-top box designed to enhance the viewing experience by integrating cutting-edge technology with user-friendly features. This device is tailored to meet the growing demands of digital television while providing a seamless user interface that caters to both casual viewers and tech-savvy individuals.

One of the main features of the DTX6372 is its compatibility with multiple broadcasting standards, including DVB-T, DVB-C, and IPTV. This allows users to access a wide array of channels and services, ensuring that they never run out of entertainment options. The device supports high-definition content, enabling viewers to enjoy their favorite shows and movies in stunning clarity.

The DTX6372 is equipped with advanced decoding capabilities, allowing it to handle various video formats effortlessly. It includes support for MPEG-2, MPEG-4, and H.264 formats, making it a future-proof choice for digital television. The device also features a built-in Electronic Program Guide (EPG), which facilitates easy navigation through channels and programs, helping users to find content quickly and efficiently.

Another key characteristic of the DTX6372 is its connectivity options. With multiple HDMI and USB ports, users can connect additional devices, such as gaming consoles, external storage, or home theater systems, expanding their entertainment options. Additionally, the device supports Ethernet and Wi-Fi connectivity, enabling users to stream content from various online platforms and access the internet without needing a separate device.

User experience is enhanced further by the DTX6372’s intuitive remote control, which features dedicated buttons for popular streaming services. This streamlining of controls makes it easier for users to switch between live television and on-demand content.

Furthermore, the device incorporates features designed for energy efficiency, with low power consumption during both active and standby modes. This not only reduces electricity bills but also aligns with the growing global emphasis on sustainability and environmental responsibility.

Overall, the Philips DTX6372 represents a significant leap in set-top box technology, combining excellent performance with essential features to deliver a comprehensive digital television experience. Its adaptability, high-definition support, and user-friendly interface make it a valuable addition to any home entertainment system, ensuring that viewers can stay connected with their favorite content effortlessly.
Top Page Image Contents