Hookups With a Cable Box/Direct Broadcast System (cont’d) 11
With this connection:
●You may watch one channel while recording another.
●You may not record scrambled channels.
1 DVD/VCR
|
| DVD/VCR |
| IN | OUT |
L | DVD/VCR | |
| ||
| AUDIO | AUDIO OUT |
| R | L |
|
| |
| VIDEO | R |
2 Cable Box/DBS
IN
OUT
75 ANT / CABLE
Cable Signal
CH3 CH4
RF coaxial
cable
RF coaxial
cable
Connections
1
Connect a Cable signal to the DVD/VCR’s
2
Use an RF coaxial cable (supplied) to connect the
3
Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the DVD/VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04).
Then, with the DVD/VCR in VCR position (the VCR light and the VCR/TV light will appear on the display panel), use the CHAN- NEL o/p buttons to select the channel you want to record at the DVD/VCR. Start the recording.
3 TV’s ANTENNA IN Jack
2
Press the VCR/TV button once to put the DVD/VCR in TV position. (The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable Box/DBS.
Helpful Hint
•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the DVD/VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).
