Philips DVD741VR owner manual Back of Stereo example only

H9231CD(EN).QX3 02.9.5 7:13 PM Page 12

12 Hookups (cont’d)

DVD/VCR to a Stereo and to a TV that has Component Video In jacks

Antenna/Cable	DVD/VCR
TV Signal

1 ANT-IN

ANT-OUT

CH3 CH4

2

IN	DVD/VCR	COMPONENT
	OUT
		VIDEO OUT
		DVD/VCR	Y
		AUDIO OUT
				DIGITAL AUDIO OUT
AUDIO			S-
		L		PCM/MULTICHANNEL
			Cb

VIDEO R Cr

AUDIO (LEFT) IN

AUDIO (RIGHT) IN

Back of Stereo (example only)

	COMPONENT
	VIDEO IN
	Y
3	Cb/Pb
	Cr/Pr

Back of TV (example only)

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors to the jack colors.

3 Connect component video cable (not supplied) to the COMPO- NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO- NENT VIDEO IN jacks on the TV.

The Component Video connection only supplies video (picture) for the DVD Player of the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable. To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the supplied yellow video cable, see step 3 on page 11.

4 Connect the power cords of all the equipment to a power outlet. Turn on the Stereo and select the Stereo’s Auxiliary IN station.Turn on the TV and set it to the Component Video In channel. If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the red/white/yellow audio/video cables for VCR playback, choose the Audio/Video In channel at your TV. Or, simply continue changing channels at the TV until you see VCR or DVD playback on the TV screen.

5 You are ready to turn on the DVD/VCR. Go to page 15 before turn- ing on the DVD/VCR.

6 After you complete the VCR setup as described on page 15, set DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are on page 70. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.