Philips DVD741VR Video Cassette Playback, Read and follow the steps below to play a tape

H9231CD(EN).QX3 02.9.5 7:13 PM Page 16

16 Video Cassette Playback

VCR

Read and follow the steps below to play a tape.

1 Turn on the TV and set it to channel 3 or 4, whichev-

er channel the CH3/CH4 switch on the back of the DVD/VCR is set to. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the TV. Details are on page 11.

2 With the DVD/VCR power off, insert a tape in the cassette compartment of the DVD/VCR. The Power, VIDEO,VCR/TV, and CST. IN lights will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.

If the DVD/VCR power is already on, press OUTPUT SELECT to put the DVD/VCR in VCR mode if necessary. The green VIDEO light will appear on the front of the DVD/VCR.

3 If playback does not start automatically, press VCR, then press PLAY B (o).

4 Press STOP C (p) to stop playback.

5 Press REW h (s) to rewind the tape.

6 After the tape stops, press STOP/EJECT on the DVD/VCR to remove the tape.

1 Turn on the TV. Insert a tape in the

2 DVD/VCR.

				POWER
	MARKER
	SETUP	AUDIO	SUBTITLE	ANGLE
	REC/OTR	REPEAT		REPEAT
				A-B
		CHANNEL/SKIP
			CLEAR
	TITLE		MODE	RETURN	3
		OUTPUT SELECT
	DVD			VCR
	DISC
	MENU			OK
4	STOP			PLAY
	REW			FF
5		PAUSE
				TIMER SET
	1	2	3	VCR/TV

4 5 6

6Press STOP/EJECT on the DVD/VCR.

Helpful Hints

•If the tape you want to play is already in the DVD/VCR, make sure the DVD/VCR power is on and the DVD/VCR is in VCR mode and VCR position. (The green VIDEO light and the VCR/TV light will appear on the front of the DVD/VCR.) Press VCR, then press PLAY B(K).

•Other tape playback options and features are on pages 39-46.

•When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.

•If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. Details are on page 39.

•You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features.