Philips DVD741VR owner manual Time Search, Press VCR, then press Search MODE/TIME

H9231CD(EN).QX3 02.9.5 7:13 PM Page 41

VCR

Follow the steps below to program the DVD/VCR to search for- ward or backward on a tape a specific length of time.There must be a tape in the DVD/VCR.

●Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR.

1	Press VCR, then press SEARCH MODE/TIME
	SEARCH.
	TIME SEARCH
	0:00

ENTER SEARCH TIME

2 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or backward. For example, for 1 hour, 25 min- utes, press Number buttons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.

3 Within 10 seconds, press FF g (B) or REW h (s). The DVD/VCR will skip over the specified length of time, then begin playback.

Time Search 41

				POWER
	MARKER
	SETUP	AUDIO	SUBTITLE	ANGLE
	REC/OTR	REPEAT		REPEAT
				A-B
		CHANNEL/SKIP
		CLEAR
	TITLE	MODE		RETURN	1
		OUTPUT SELECT
	DVD			VCR
	DISC
	MENU			OK
	STOP			PLAY
3	REW			FF
		PAUSE
				TIMER SET
	1	2	3
2				VCR/TV
	4	5	6
				MEMORY
	7	8	9	SPEED
	+10	0
	SEARCH MODE DISPLAY		ZOOM	SLOW
	TIME SEARCH	STATUS/EXIT

Helpful Hints

•If you want to search for more than 59 minutes, you must enter the length of time in hours and min- utes. For example, to search forward 70 minutes, press 1,1,0 at step 2.

•You cannot do a Time Search while recording.

•To remove the Time Search display, press SEARCH MODE/TIME SEARCH again.

•To cancel a Time Search that is in progress, press STOP C (p).

•If the end of the tape is reached during a Time Search, the Time Search will be cancelled.The DVD/VCR may rewind the tape. Details are on page 43.