Philips DVD741VR owner manual On TV Video Cable 2Audio Cables

H9231CD(EN).QX3 02.9.5 7:13 PM Page 11

Hookups (cont’d) 11

DVD/VCR to a TV that has Audio and Video In jacks

Using the supplied red, white, and yellow cables

This connection will let you use the features of both the VCR and the DVD Player.

ANT-IN IN

L

AUDIO

ANT-OUT

R

CH3 CH4

VIDEO

1	Antenna or
	Cable TV
	Signal to

ANT-IN Jack

DVD/VCR

OUT

COMPONENT

VIDEO OUT

DVD/VCR	Y
AUDIO OUT
			DIGITAL AUDIO OUT
		S-VIDEO
L	Cb		PCM/MULTICHANNEL
		OUT	COAXIAL
R	Cr

Audio and Video IN Jacks

3 on TV Video Cable

2Audio Cables

1

2

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV, matching the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the DVD/VCR’s white DVD/VCR AUDIO OUT jack to the TV’s AUDIO IN jack.You will not use the red cable.

3 Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. For better DVD picture quality, connect an S-Video cable (not supplied) to the S- VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV instead. However, the S-Video connection only supplies video (picture) for the DVD Player of the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as described earlier.To connect the supplied RF coaxial cable, see step 2 on page eight.

4 Connect the power cords of the TV and the DVD/VCR to a power outlet.Turn on the TV and set it to the correct Audio/Video In chan- nel. If you are using the red/white/yellow audio/video cables for VCR or DVD playback, choose the Audio/Video In channel at your TV. If you are using the S- Video cable for DVD playback, choose the S-Video In channel at your TV. If you are using the RF coaxial cable for VCR or DVD playback, choose channel 3 or 4 at the TV. See your TV owner’s manual for more details. Or, simply continue changing channels at the TV until you see VCR or DVD playback on the TV screen.

5 You are ready to turn on the DVD/VCR. Go to page 15 before turn- ing on the DVD/VCR.