Philips DVD750/05 Connecting to optional equipment, Analog stereo, Digital Multi channel sound

AMPLIFIER

TV

7 6 5

DIGITAL AUDIO OUT		STEREO OUT			OUT
PCM/MPEG2/AC3/DTS
OPT OUT	DIG OUT	R	L	(CVBS)	(Y/C)
			AUDIO	VIDEO OUT	S-VIDEO OUT

I

AUX-I/O

II

TO TV-I/O

Connecting to optional equipment

	English
Connecting to an amplifier equiped with two channel
analog stereo

●Connect the audio Left and Right output sockets to the corresponding sockets on your amplifier, receiver or stereo system. For this use the audio cable supplied (5).

Connecting to an amplifier equiped with two channel digital stereo (PCM)

1Connect the player’s digital audio output (optical 7 or coaxial 6) to the corresponding input on your amplifier.

For this use an optional digital (optical 7 or coaxial 6) audio cable.

2You will need to activate the player’s digital output (see ‘Personal Preferences’).

Connecting to an A/V receiver with multi-channel decoder (Dolby, MPEG 2 and DTS)

Digital Multi channel sound

Digital multi channel connection provides the optimum sound quality. For this you need a multichannel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital (AC3) and DTS). For this you can check the receiver manual and the logos on the front of the receiver.

1Connect the player’s digital audio output (optical 7 or coaxial 6) to the corresponding input on the receiver using an optional digital (optical 7 or coaxial 6) audio cable.

2You will need to activate the player’s digital output (see ‘Personal Preferences’).

Note: If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound.The audio format of the DVD disc in play is displayed in the Status Window, when chang- ing the language.

6 Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multichannel decoder.

PREPARATION 15