|
|
|
|
| Connections | |
|
|
|
|
|
| English |
|
| RF coaxial cable to TV |
| |||
|
| 2 |
|
|
|
|
COMPONENT |
|
| Back of RF Modulator | |||
VIDEO IN |
| |||||
|
| |||||
V (Pr/Cr) | IN |
|
| (example only) | ||
AUDIO |
|
| ||||
| IN |
|
| |||
U (Pb/Cb) | VIDEO IN | INT IN | TO TV VIDEO | AUDIO IN |
| |
|
| IN | R | L |
| |
|
|
|
| |||
Y |
|
|
|
|
|
|
|
|
|
|
| CH3 | CH4 |
1 | 2 | Antenna or |
|
|
|
|
| Cable TV signal |
|
|
| ||
|
|
| 1 |
| ||
|
|
|
|
|
| |
IMPORTANT!
–Component Video connection provides higher picture quality. This option must be available on your TV.
–The progressive scan video quality is only possible through Component Video (Y Pb Pr) output.
Using Component Video jacks (Y Pb Pr)
1Use the component video cables (green/ blue/red) to connect the DVD system’s Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb Pr) on the TV (cable not supplied).
2To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).
IMPORTANT!
–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact for details on RF modulator availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
7
