OVEN AND ACCESSORIES
6 9 3 | 1 |
| OVEN | |
|
|
| 1. | Oven lamp |
|
|
| 2. | Control panel |
|
|
| 3. | Waveguide cover (DO NOT REMOVE) |
8 |
|
| 4. | Turntable motor shaft |
|
| 5. | Oven cavity | |
|
| 2 | ||
7 |
| 6. | Door seals and sealing surfaces | |
|
| |||
|
|
| 7. | Door safety latches |
|
|
| 8. | Door handle |
| 5 7 |
| 9. | Grill heating element |
4 |
| 10. | Power supply cord | |
10 | 11 |
| 11. | Ventilation openings |
|
|
| 12. | Outer cabinet |
12 |
|
|
|
|
ENGLISH
Hub (inside)
13. Turntable (glass)
15.Coupling 
14. Turntable support
16.Rack
ACCESSORIES:
Check to make sure the following accessories are provided:
(13) Turntable (14) Turntable support (15) Coupling (16) Rack
Place the coupling into the turntable motor shaft and then place the turntable support in the centre of the oven floor so that it can freely rotate around the coupling. Place the turntable onto the turntable support so that it locates firmly into the coupling. To avoid turntable damage, ensure dishes and containers are lifted clear of the turntable rim when removing them from the oven.
For use of the rack, refer to the grilling sections on page
Never touch the grill when it is hot.
NOTE: When you order accessories, please mention
two items: part name and model name to your dealer or SHARP authorised service agent.
NOTES:
•The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not damaged.
•Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough, even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.
•All food and containers of food are always placed on the turntable for cooking.
•The turntable rotates clockwise or
