Your oven has a 24 hour clock mode.

1.Press the CLOCK SET/ DELAY START button once. The hour figure will flash and the clock indicator will light up.

2.Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.

3.Press the CLOCK SET/ DELAY START button, the minute figure will flash.

4.Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59.

5.Press the CLOCK SET/ DELAY START button to start the clock. The icon “:” of the digital time will be flashing on the display and the clock indicator will disappear.

NOTES:

If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will show "0:00".

To check the time of day during a cooking process, press CLOCK SET/ DELAY START button and the LED will display the time of day for 2-3 seconds. This does not affect the cooking process.

In the process of clock setting, if the STOP button is pressed, the oven will go back to the former setting.

If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

Your oven has 5 power levels and to set the power follow the instruction below:

 

To set the power level

 

LED Display

Microwave Power

 

 

 

 

Press the MICROWAVE/GRILL/MIX GRILL button

 

HIGH = 100%

 

once, P 100 will be displayed and at the same time

 

 

the microwave indicator and high heat indicator

 

 

 

will light up on the display.

 

 

 

 

 

 

 

Rotate the ENTRY dial to change the power level

 

MEDIUM HIGH = 80%

 

until the oven indicates the desired level.

 

 

 

 

 

 

Press the MICROWAVE/GRILL/MIX GRILL button

 

 

 

 

 

to confirm the setting, enter the cooking time and

 

MEDIUM = 50%

 

then press the START/+1min button (

) to

 

start the oven.

 

 

 

To check the power level during cooking, press

 

 

 

the MICROWAVE/GRILL/MIX GRILL button, the

 

MEDIUM LOW = 30%

 

current power level will be displayed for 4 seconds.

 

 

 

The oven will continue to count down although

 

 

 

 

 

 

the display will show the power level.

 

 

LOW = 10%

 

 

 

 

 

 

 

 

 

Generally the following recommendations apply:

P100 - (HIGH output = 800 W) used for fast cooking or reheating e.g. for casseroles, hot beverages, vegetables etc.

P80 - (MEDIUM HIGH output = 640 W ) used for longer cooking of dense foods such as roast joints, meat loaf and plated meals, also for sensitive dishes such as sponge cakes. At this reduced setting, the food will cook evenly without over cooking at the sides.

P50 - (MEDIUM output = 400 W) for dense foods which require a long cooking time when cooked conventionally, e.g. beef casserole, it is advisable to use this power setting to ensure the meat will be tender.

P30 - (MEDIUM LOW output = 240 W Defrost setting) to defrost, select this power setting, to ensure that the dish defrosts evenly. This setting is also ideal for simmering rice, pasta, dumplings and cooking egg custard.

P10 - (LOW output = 80 W) For gentle defrosting, e.g. cream gateaux or pastry.

GB-8

Page 10
Image 10
Sharp R-63ST operation manual GB-8, To set the power level LED Display Microwave Power, Then press the START/+1min button