22
English
ACCESS CONTROL
Activating/Deactivating Parental Control
1When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/v keys.
2Enter your 4-digit code. If necessary, enter the code a
second time.
3Move to Parental Level using the w/v keys.
4Move to VALUE ADJUSTMENT (1-8) using the u key.
5Then use the w/v keys or the numerical keys on the
remote control to select a rating from 1 to 8 for the disc
inserted.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The Disc will be played in
full.
Ratings 1 to 8:
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc. The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
6Press OK or t to confirm, then press t again to exit the
menu.
Country
1When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/v keys.
2Enter the 4-digit code.
3Move to CHANGE COUNTRY using the w key.
4Press the u key.
5Select a country using w/v.
6Press OK or t to confirm, then press t again to exit the
menu.
Changing the 4-digit code
1When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/v keys.
2Enter the old code.
3Move to CHANGE CODE using the w key.
4Press the u key.
5Enter the new 4-digit code.
6Enter the code a second time and reconfirm by pressing
OK.
7Press t to exit the menu.
If you forget your 4 digit code
1Press 9 to exit ‘Child Protect’ screen.
2Select ACCESS CONTROL in the features menu using
the w/v keys.
3The 4-digit code can be cancelled by pressing 9 four times
in the ‘Access Control’ dialog.
4You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
This DVD player features the PARENTAL CONTROL
system which is intended to be active when playing DVD
discs with certain software coding. This is according to
technical standards adopted by the set maker and disc
content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD which does not have with the
appropriate software coding. Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis Philips cannot guarantee the functioning of
PARENTAL CONTROL and denies any liability
associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access.