Preparation
–PCM Output
Allows to select PCM digital output between 48kHz and 96kHz. When 48kHz has been selected, 96kHz PCM data, (if available on disc) will be converted to 48kHz.
Some 96kHz DVD are copy protected. If your PCM output selection is 96kHz, the digital output will be muted to comply with the standards. In such cases, select 48kHz to enable digital output.
–CD Upsampling
Allows you to upsample your CD from 44.1 kHz
/16 bit to various higher sampling rate for superior CD reproductions.
The selections are: OFF, 96kHz/24bits, 172kHz/ 24bits.
The upsampling of CD can be toggle “ON/OFF” via the AUDIO key on the remote control.
Speaker settings (Advance Bass Management)
Allows you to select speaker settings, volume balance and delay time, and to test the speaker settings.
Speaker settings are only active on the Multi- Channel Audio outputs for both DVD and SACD.
Movie mode
When movie mode is set, speaker settings will not be applied during playback in the SACD Stereo mode.
Music mode - SACD
When music mode is set, speaker settings will be applied during playback in the SACD Stereo mode only.
Additional adjustments available in SACD bass managements are:
Cross over frequency adjustment: 80Hz, 100Hz and 120Hz.
Filter slop adjustment: 12dB/oct, 18dB/oct and 24db/oct.
Note:
–These additional adjustments are
available in the subwoofer adjustments.
E n g l i s h
19
