Philips DVDR3350H user manual Adjusting the speaker output levels

Getting Started

En	CENTER DELAY Ð Select this to set
	the delay time in relation to the listening
gli	position/distance from the center speaker :
sh	5ms, 3ms, 2ms, 1ms or OFF (default
	setting).
	REAR DELAY Ð Select this to set the
	delay time in relation to the listening
	position/distance from rear speakers :
	15ms, 12ms, 9ms, 6ms, 3ms or OFF
	(default setting).
	TEST TONE Ð Select this to turn ÔONÕ
	or ÔOFFÕ (default setting) the test tone.
	If you have turned on the test tone, the
	test signal will be automatically generated
	to help you judge the sound level of each
	speaker and subwoofer.
	MENU OFF Ð Select this to exit from
	the system setup.
	3 Press PROG to confirm your selection.
	4 Use the VOLUME control to adjust the
	settings that best suit your surround
	sound needs.
	➜ If the volume control is not used
	within 5 seconds, it will become normal
	volume control function.
	5 Press PROG to confirm your selection.

Helpful Hints:

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–If “CHECK SURROUND SETTINGS” appears on the display, press SURROUND button to select surround mode.

–“AUTO PROG’” only available for selection in tuner mode only.

18

Adjusting the speaker output levels

You can adjust the rear speakers, center speaker and subwoofer output levels by comparing the sound from the front speakers.

REPEAT	REPEAT	SLEEP	DIM
SUBW	REAR	CENTER	TV VOL

●Press the respective buttons on the remote (REAR +-, CENTER +- and SUBW +-) to adjust the output level between -15dB ~ 10dB.

Helpful Hint:

– If you have selected Stereo or VSS mode, adjusting the center and rear speakers’ volume level will have no effect.

001-003_HTR5000_01_Eng2 15 1/2/32, 12:25 AM 8239 300 30571