Philips DVDR3350H user manual Screensaver, Spdif Output

Setup Menu Options (continued)

PREFERENCES settings (underlined options are the factory default settings)

Reset Menu settings	Press	to reset the menu settings of this recorder.
	A warning message will appear. Select			OK OK	in the menu to
	proceed or CANCELOK		to abort, then press OK to confirm.
	The screen saver prevents damage to the TV screen by
Screensaver
	avoiding	exposure to a static image for too long.
	Press	to access this menu and use		keys to select one of

the options.

{On } – Select this if you wish to turn off the TV screen, after playback had been stopped or paused for more than 15 minutes.

{Off } – Select this to disable the screen saver.

English

AUDIO settings (underlined options are the factory default settings)

SPDIF Output	Press to access this menu and use		keys to select one of
	the options.
	{ RAW }	– Select this if you have used the recorder’s COAXIAL
		OUT jack to connect to a multichannel receiver.
	{ LPCM }	– Select this if you have used the recorder’s COAXIAL
		OUT jack to connect to a stereo or audio/video
		system.
	This setting allows you to select between two levels:
LPCM Output

{LPCM 48 kHz} – Select this if the connected audio device is capable of processing digital signal input with sampling rates of 48 kHz. In addition, the disc you are playing back must be recorded in 48kHz LPCM format.

{LPCM 96 kHz} – Select this if the connected audio device is capable of processing digital signal input with sampling rates of 96 kHz.In addition, the disc you are playing back must be recorded in 96kHz LPCM format.

TIPS: The underlined option is the factory default setting.

Press to go back to previous menu item. Press SETUP to exit the menu.

67