Philips DVDR3510V, DVDR3512V quick start To change/ reset the password, Digital Audio Output

English

Setup Menu Options (continued)

Playback settings (underlined options are the factory default settings)

Parental Rating Level

New Password
New password
* * * *	OK

Confirm password

CANCELOK

To change/ reset the password

1)Use ST keys to select { Parental Rating Level } and press OK.

2)Use the numeric keypad 0-9to enter your four-digit pin code.

3)	Move to	OK	in the menu and press OK on the remote
	control. The set rating level menu appears.
4)	Move to		in the menu and press OK to access new
		New
	password menu.

5)Use the numeric keypad 0-9to enter your new four-digit pin code, then press T to select the next entry field and enter the same pin code a second time.

6) Move to OK in the menu and press OK to confirm. Note: To abort the change, select CANCEL and press OK .

Digital Audio Output

Adjust the digital output setting only if you have connected other devices to the coaxial socket on the recorder.

{ALL } – Select this if you have used the COAXIAL socket on the recorder to connect to a stereo receiver that has a built in multichannel decoder.

{LPCM } – Select this if the connected audio equipment is not capable of decoding multichannel audio Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

56

DVDR3510V_eng_26244.indd 56 2007-08-01 1:46:24 PM