Philips DVP1033/51 user manual Video setup, Make loud sound level softer and soft sound level

[Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

‡ [LT/RT] - For the surround sound output through two speakers.

‡ [Stereo] - For the stereo output. [Digital Audio]

6HOHFWDGLJLWDOVHWWLQJEDVHGRQWKHGLJLWDODPSOLÀHU receiver that is connected through the digital jack (coaxial/digital).

‡ [Digital Output] - Select a type of digital output.

‡ [All] - Support multi-channel audio formats.

‡ [Off] - Disable digital output.

‡ [PCM Only] - Downmix to two-channel audio format.

‡ [LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate. ‡ >N+=@ - For discs recorded at sampling

rate of 48 kHz.

‡ >N+=@ - For discs recorded at sampling rate of 96 kHz.

Note

‡[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

‡The higher the sampling rate, the better the sound quality.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OKWRFRQÀUPDQGH[LW

[Sound Mode]

Select a preset sound effect to enhance the audio output.

‡ [3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

‡ [Movie Mode] - Select a sound effect for movies.

‡ [Music Mode] - Select a sound effect for music.

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

‡ [Off] - Turn off CD-upsampling.

‡ >N+]@ - Convert to twice the original sampling rate.

‡ >N+]@ - Convert to four times the original sampling rate.

[Night Mode]	English
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
‡ [On] - Enjoy quiet viewing at night.
‡ [Off] - Enjoy surround sound with a full
dynamic range.

Note

‡Applicable only to Dolby Digital encoded DVDs.

Video setup

	Press SETUP.
	» >*HQHUDO6HWXS@ menu is displayed.

2 Press to select [Video Setup], and then press to enter the submenu.

3Select an option, and then press OK.

Select a setting, and then press OK.

‡ To return to the previous menu, press

BACK.

‡ To exit the menu, press SETUP. [TV System]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

‡ [PAL] - For a PAL-system TV.

‡ [Multi] - For TV that is compatible with both PAL and NTSC.

‡ [NTSC] - For an NTSC-system TV. [TV Display]

Select a display format:

EN 13