Philips DVP2320BL/12 user manual Video setup

•[Digital Output] - Select a type of digital output.

•[Off] - Disable digital output.

•[All] - Support multi-channel audio formats.

•[PCM Only] - Downmix to two-channel audio format.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

•[48kHz] - For discs recorded at sampling rate of 48 kHz.

•[96kHz] - For discs recorded at sampling rate of 96 kHz.

Note

•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

•The higher the sampling rate, the better the sound quality.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OK to confi rm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

•[Movie Mode] - Select a sound effect for movies.

•[Music Mode] - Select a sound effect for music.

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

•[Off] - Turn off CD-upsampling.

•[88.2kHz (X2)] - Convert to twice the original sampling rate.

•[176.4kHz(X4)] - Convert to four times the original sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

•[On] – Enjoy quiet viewing at night.

•[Off] – Enjoy surround sound with a full dynamic range.

		Note
			English
•	Applicable only to Dolby Digital encoded DVD.

Video setup

1Press SETUP.

» [General Setup] menu is displayed.

2 Press to select [Video Setup], then press .

3Select an option, then press OK.

4Select a setting, then press OK.

• To return to the previous menu, press .

•To exit the menu, press SETUP.

[TV System]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

•[PAL] - For PAL-system TV.

•[Multi] - For TV that is compatible with both PAL and NTSC.

•[NTSC] - For NTSC-system TV.

[TV Display]

Select a display format:

•[4:3 Pan Scan] - For 4:3 screen TV: full-height display with the trimmed sides.

•[4:3 Letter Box] - For 4:3 screen TV: wide- screen display with black bars on the top and bottom of the screen.

•[16:9] - For wide-screen TV: display ratio 16:9.

EN 13