Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the bottom of the product.
1 Connect the AC power cable:
•to this product.
•to the wall outlet.
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
Caution
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the correct viewing channel
1Press 
to turn on this product.
2Turn on the TV and switch to the correct
Select menu display language
1Press SETUP.
» [General Setup] menu is displayed.
2Select [OSD Language], then press
.
3Press 
to select a language, then press OK.
5 Play
Play a disc
Caution
•Do not place any objects other than discs into the disc compartment.
•Do not touch the disc optical lens inside the disc compartment.
1 Press 
PUSH TO OPEN to open the disc compartment.
2Load a disc with its label facing up.
3Close the disc compartment and start disc play.
•To view disc play, turn on the TV to the correct viewing channel for this product.
•To stop disc play, press 
.
Note
•Check the types of discs supported (see “Specifi cations” > “Play media”).
•If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control]).
•If you pause or stop a disc, the screen saver appears after 5 minutes of inactivity. To deactivate the screen saver, press DISC MENU.
•After you pause or stop a disc and no button is pressed within 15 minutes, this product automatically switches to standby.
8EN
