Philips DVP2880 user manual Preference languages, parental control

•[Analogue Output]: Select an audio format for sound output when this player is connected through the AUDIO OUT L/R connectors.

•[Digital Audio]: Select an audio format for sound output when this player is connected through the COAXIAL connector.

•[Digital Output]: Select a type

of digital output: [Off] - Disable digital output; [All] - Support multi-channel audio formats; [PCM Only] - Downmix to two-channel audio signal.

•[LPCM Output]: Select a LPCM (Linear Pulse Code Modulation) output sampling rate.The higher the sampling rate, the better the sound quality. [LPCM Output] is enabled only when [PCM Only] is selected under [Digital Output].

•[HDMI Audio]: Enable or disable the audio output through HDMI connection.

•[Audio Sync]: Set a delay time for audio output to match the video play.

•[Volume]: Change a volume level.

•[Sound Mode]: Select a preset sound effect.

•[Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).

Note

•• Night mode is only available for Dolby encoded DVD discs.

Preference (languages, parental control...)

1 Press .

2 Select [Setup] > [Preference] to access the preference setup options.

•[Audio]: Select an audio language for video.

•[Subtitle]: Select a subtitle language for video.

•[Disc Menu]: Select a menu language for a video disc.

•[Parental Control]: Restrict access to discs that are encoded with ratings.

Input "136900" to access the restriction options: When the password field

is highlighted, press OK to enter an

input stage, press to select a digit and press / to change a digit position.

•[PBC]: Display or skip the content menu for VCD and SVCD.

•[Password]: Set or change a password to play a restricted disc. Input "136900" if you do not have a password or if you have forgotten your password

•[DivX Subtitle]: Select a character set that supports the subtitle of your DivX video.

•[Version Info]: Display the software version for this player.

•[Default]: Reset all settings to the factory default, except for the settings for [Disc Lock], [Parental Control] and [Password].

Note

•• If your preferred language is not available for disc language, audio or subtitle, you can select [Others] from the menu options and input 4-digit language code which can be found at the back of this user manual.

•• The rating levels are country-dependent.To allow all discs to be played, select [8 Adult].

12EN