English
9

22 Clock (VCR)

• If the clock has never been set,
the CLOCK SET menu may
appear when you press
DISC/VCR MENU.If so, follow
the instructions from step 3
above.
• Press DISPLAY until the time
appears on the TV screen.
• Power failures of more than 30
seconds can erase the clock
setting.
• To reset the clock,follow steps
1-2. Select the information you
want to change using sor B.
When the information is
flashing, use Kor Lto enter
the correct information.Press
CLEAR/RESET to set the clock.
Helpful Hints
2-9
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
1
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUT EAM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 2 1 MON 2 0 0 5
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
Follow these steps to set the VCR clock.Make sure:
1Press VCR,then press DISC/VCR MENU so MENU
appears. If the clock has never been set,the CLOCK SET
menu may appear when you press DISC/VCR MENU.If so,
follow the instructions from step 3 on this page.
2Press Kor Lto select CLOCK SET.Then,press B.
3While the MONTH space is flashing, press Kor L
until the month appears.Then, press B.
4While the DAY space is flashing,press Kor Luntil
the day appears.Then, press B.
5While the YEAR space is flashing,press Kor L
until the year appears.Then, press B.The day of
the week will appear automatically.
6While the HOUR space is flashing, press Kor L
until the hour appears.Then, press B.
7While the MINUTE space is flashing, press Kor L
until the minute appears.Then, press B.
8While the AM or PM space is flashing,press Kor L
to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9Press CLEAR/RESET or Bto start the clock.
H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 22