English
26 One-Touch Recording
OTR (0:30)
SP
One-Touch Recording (OTR) lets you set a timed recording 30
minutes to 8 hours long of the current TV channel.Before you
begin:
●Place the DVD/VCR in VCR mode. Press VCR so VCR light
appears on the front of the DVD/VCR.
●Select a recording speed (SP, SLP) with SPEED.
●Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the program(s).
1Press VCR,then press SKIP ∑/CH Kor SKIP w/CH L
or the Number buttons to select the channel you want
to record.
2Press RECORD Irepeatedly until the desired
recording length (30 minutes to 8 hours) appears
on the TV screen.Recording will begin. “REC” and “ ”
will appear on the DVD/VCR’s display panel.
Stopping an OTR
To stop an OTR before recording is finished, press STOP Con the
remote control or STOP/EJECT C A (VCR) on the front of the
DVD/VCR.
To cancel the OTRbut continue recording, press RECORD I
repeatedly until REC appears in the upper left corner of the TV
screen, and “ ” disappears.
When an OTR finishes,the DVD/VCR will either switch to DVD
mode or turn itself off. If it changes to DVD mode,press
STANDBY-ON yto turn it off.
After an OTR,“ ” flashes because the VCR is still on standby for
timer recordings.Press TIMER SET on the remote or
STOP/EJECT C A (VCR) on the DVD/VCR to cancel timer
standby and use the VCR normally again.
• The remaining recording time will
appear on the display panel
during an OTR.Press DISPLAY
to see it on the TV screen.
• To change the recording length
while an OTR is in progress,
press RECORD Irepeatedly.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR,the OTR has priority.The
timer recording will not take
place.
• If the end of the tape is reached
during an OTR,the VCR will
stop recording,eject the tape ,
and switch to DVD mode or
turn off.
• If one or more Timer
recordings are on standby when
one OTR ends,the DVD/VCR
will turn off automatically and
“
” will appear on the
DVD/VCR's display panel
indicating that it is now ready
for another timer recording.
Helpful Hints
1
2
STANDBY-ON
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
When an OTR ends
The DVD/VCR will turn off and “ ” on the DVD/VCR's display
panel will flash indicating that the recording is complete, or it may
switch to DVD mode automatically.Press TIMER SET to use the
DVD/VCR as usual.
H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 26