Philips DVP3050V/37B user manual Hookups cont’d

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 9

Hookups (cont’d) 9

DVD/VCR to TV only

Simplest connection using only the supplied black RF coaxial cable

This connection will let you use the features of both the VCR and the DVD Player.

English

	DVD			DVD/VCR VCR
DIGITAL	AUDIO	S-VIDEO		AUDIO OUT AUDIO IN	ANT - IN
AUDIO OUT	OUT	OUT
		Y		L	L
	L
		C	/	R	R
COAXIAL		P
	R			VIDEO OUT VIDEO IN	ANT-OUT

C /

ANT - IN

ANT-OUT

1Antenna or Cable TV

signal

75 ANT / CABLE

Antenna In Jack (on back of TV) example only

2 Black RF coaxial cable (supplied)

1 Disconnect the antenna or Cable TV signal from your TV and connect it to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied black RF coaxial cable to the ANT-OUT (Antenna Out) jack on the back of the DVD/VCR and to the ANTENNA IN jack on the TV. The ANTENNA IN jack on the TV may be labelled TV IN, RF IN, 75Ω (ohm), or ANT-IN. See your TV owner’s manual for assistance.

3 Plug in the power cord of your TV.Turn on the TV and set it to channel 3 or 4.

4 Plug in the power cord of the DVD/VCR.You are ready to turn on the DVD/VCR. Go to page 16 before turning it on.

The DVD/VCR’s output channel is 3 when you purchase it. So, set your TV to channel 3 when the DVD/VCR is new.

If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output channel to channel 4.To do so, press VCR to put the DVD/VCR in VCR mode. VCR light will be on the front of the DVD/VCR. Insert a videotape and press PLAY B to start playback. During playback, press and hold (VCR) PLAY B on the front of the DVD/VCR for 3-5 seconds. Each time you do this, the DVD/VCR’s output channel switches between 3 and 5, and the selected channel number appears on the display panel. Change your TV to channel 3 or 4 accordingly. (You cannot change the DVD/VCR’s output channel while adjusting tracking manually. Press STOP C to stop playback and cancel manual tracking, then press PLAY B to resume playing and change the output channel.)

There is not a channel 3/4 switch on the DVD/VCR (as customary with most VCRs).