English
31
Additional Operation
On Screen Display
You may easily display the current time or tape counter,
amount of tape left,day, month,year,day of week,
programme channel,tape speed and operational mode of
your VCR on the TV screen.If a recording is taking place
these On Screen Displays will not be recorded onto the
tape.
1Press DISPLAYto display.
Press DISPLAYrepeatedly to cycle through the
display options.The tape counter and amount of tape
left will appear if there is a tape loaded.
2After 3 seconds the majority of the On Screen Displays
will clear leaving only the clock or tape counter and the
amount of tape left on the screen.
Press DISPLAYagain to remove all displays from the
TV screen.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the
display window instead of the time by pressing DISPLAY
on the remote control.The Digital Tape Counter indicates
the relative positions of recordings on the tape.
1Press DISPLAY.
Press CLEAR to set the counter to 0:00:00.
Press PLAYBor start recording.
The tape counter will display the actual play time in
hours,minutes and seconds.
2Press STOP9when playback or recording is
complete.
Press S.
The tape will rewind and automatically stop when the
counter returns to 0:00:00.
Child Lock
The control buttons on the front of the unit can be
switched off so that your unit can only be operated using
the remote control.
1Press CHILD LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons on the front of your unit are pressed
SAFE will appear in the display window for a few
seconds.
2Press CHILD LOCK again to switch off the child lock.
OFF will appear in the display window.
Note
–CHILD LOCK is not available on the DVDmode.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
VCR.These error messages will appear on the TV screen.
1Press SYSTEM MENU.
Press 11or 22to select .
Press OK.
2Press 33or 44to check a problem.
ANTENNA CONNECT
OPLEASE CHECK:
Connect the aerial into the jack securely.
HEAD STATUS
OPLEASE CLEAN:
Clean your video heads.
TAPE STATUS
ONOT RECORDABLE:
Insert a tape with its protection tab in place
NO.OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
OPR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3Press SYSTEM MENU.
i
ANTENNA CONNECT
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
+
PLEASE CHECK
REC
OK
i
SYS
Pr-12
ACMS
12
SET
PSET
R
OSD
ON
OFF
OSD
f
NIC
DECO-
DER
+
-
AUD
+
+