Setup Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
Analog Output | This setting is only required if you have connected the audio | ||
| output of this unit to a stereo device, multi channel audio system | ||
| or TV using the analog output jack. | ||
| { LT/RT } | – | The connected device has a |
|
|
| Dolby Pro Logic decoder. It can deliver |
|
|
| the surround sound through the two |
| { Stereo } |
| speakers. |
| – | The connected device can only output | |
| { V SURR } |
| stereo audio through two speakers. |
| – | For virtual surround sound effects. | |
| { Multi Channel } | – | The connected device can output 5.1 |
|
|
| channel sound. |
| This setting is only required if you have connected the audio | ||
Digital Audio Setup | |||
| output of this unit to an amplifier/receiver using the digital | ||
| output jack. |
|
|
| { Digital Output } | – | { SPDIF Off } |
|
|
| Disable digital audio output. Select this |
|
|
| if you are using the analog audio jacks |
|
|
| to connect this unit to a TV or Stereo |
|
|
| system. |
|
|
| { All } |
|
|
| The connected device supports multi- |
|
|
| channel audio formats. The digital audio |
|
|
| format will be output as on disc. |
|
|
| { PCM Only } |
|
|
| The connected device does not support |
|
|
| |
|
|
| are downmixed to PCM format |
|
|
| |
| { LPCM Output } | – | { 48 K } |
|
|
| Select this to play disc recorded at |
|
|
| sampling rate of 48 kHz. |
{ 96 K }
Enable 96 kHz output on digital audio if the amplifier/receiver is compatible with high sampling rate audio (88.2 / 96 kHz). However, if the sound output is distorted or there is no sound, change the setting to ‘48 K’.
Note: LPCM Output can only be selected when { PCM Only } is activated. The higher the sampling rate, the better the sound quality.
35
English
dvp3258_93_eng1.indd 35 |
