Setting up
•Start the Web browser from the host connected to the Presenter.
•Enter the IP address or host name (if allocated) of the Presenter, following [http://], in the address column of the
Web browser provided for entering the URL to be opened.
•When the
•Then, the Configurations page is displayed. Confirm the settings, and click the link [FTP Client Configuration].
To display the FTP Client Setting Input page, the authentication by the login password is required.
When the entry of the password is requested, enter [root] or [user] for the user name and enter the password set at the Network Setting Input page. No password has been factory set. When the Presenter remains in the factory set condition, enter no password.
•When the FTP Client Setting Input page is displayed, change the set values according to the host at the saving destination. To reset the changed set values to the original set values, click the clear button [CLEAR].
•When all items have been set, click the submit button [SUBMIT].When the message “The saving of the setup was completed.” is displayed, the setting up of the network is completed.
If the message “Incorrect value of setting exists. Please set up again.” is displayed when the submit button [SUBMIT] is clicked, there is an incorrect value entered for setting. Go back to the FTP Client Setting Input page and redo the setting.
Reference Page
· Appendix: Setting items of the FTP client | P.44 |
- 42 -
