Elmo HV-8000SX Appendix, Setting items of the network, Setting items of the FTP client

Appendix

Setting items of the network

Item	Outline
IP Address	The IP address of the Presenter.
	Specifies the value allocated by the administrator of the network in use.
	Factory set to 192.168.0.100.
Subnet mask	The mask value for separating the network address from the host address.
	Used in combination with the IP address to specify the network to which this Presenter
	belongs.Specifies the value allocated by the administrator of the network in use.
	Factory set to 255.255.255.0.
Default	Specifies the IP address of the router when this Presenter is used on the network equipped with
Gateway	a router. For the IP address of the router, ask the administrator of the network to in use. Factory
	set to 0.0.0.0. Set to 0.0.0.0. when using the Presenter on the network equipped with no router.
root password	The password for setting up the network and using telnet. Not factory set.
	Should preferably be set for the security purpose.
user password	The password for setting up the FTP client to enable the use of the image transfer button
	[IMAGE TRANSFER] and for using the FTP server function. Not factory set.

Setting items of the FTP client

Item	Outline
IMAGE TRANSFER	Specifies Enable/Disable of the image transfer button [IMAGE TRANSFER]. Factory set to Disable.
The IP address / the	Specifies the IP address of the destination host to save.
image receiving server	Factory set to 0.0.0.0.
The port number / the	Specifies the port number used by the FTP server in operation at the destination host to save.
image receiving server	Normally, no need to be changed. Factory set to 21.
The account / the	Specifies the account name used for connection to the destination host to save.
image receiving server	Factory set to anonymous.
The password / the	Specifies the password of the above account.
image receiving server	Not factory set.
Passive mode	Specifies which mode is used for file transfer, the passive mode or active mode.
	When the port is limited by firewall, etc., use the passive mode. For whether the passive mode
	should be used or not, ask the administrator of the network in use. Factory set to no use.
Destination	Specifies the destination directory to save the image file. Specifies the write-enabled directory
directory to save	of the assigned account. Not factory set. (The root directory has been specified.)
Image size	Specifies the size of image to be saved from among SXGA, VGA and QVGA. The image sizes
	are 1280X1024 for SXGA, 640X512 for VGA, and 320X256 for QVGA.
	Factory set to SXGA.
File name of	Specifies the name of the file to be saved. Automatically adds the extension [.jpg] to the file
image	name. Since any file under the same name in the saving destination is overwritten, specify a
	different file name from the existing file names. Factory set to [img].
Add sequential	Specifies whether Yes/No to the addition of sequential number to the file name. When [Yes] is
number to file	specified, the image is saved under the file name specified for the image with the sequential
name	number added (e.g., img000000.jpg, img000001.jpg) each time the file is saved. When the
	power supply to the Presenter is turned ON or the FTP client settings are changed, the
	sequential number to be added to the file name is reset to the number specified for the star
	number of sequence. Factory set to Yes.
Start number of	Specifies the start number of sequence when the sequential number is add to the file name.
sequence	Factory set to [0].
End number of	Specifies the end number of sequence when the sequential number is added to the file name.
sequence	When the sequential number reaches the end number, the sequential number returns to the start
	number of sequence. Then, if there is a file already saved with the start number of sequence,
	that file will overwritten when the new file is saved. Therefore, the end number of sequence
	should preferably be larger. Factory set to 999.

- 44 -