6. OPERATION PROCEDURES
Simple steps for presenting printed material
(1) Turn ON the power switch.
Note: Before turning ON the power switch, connection to the monitor should have been completed.
Note: When the power switch is turned ON, the lighting unit lights up.
Note: If the power switch is turned ON immediately after being turned OFF, the Presenter may not operate. For restarting, turn OFF the Presenter and wait several seconds then turn ON.
(2)Place the object on the stage. Adjust the image size according to the object size using the zoom buttons ([TELE] / [WIDE]) on the front panel or the zoom buttons ([TELE] / [WIDE]) on the wireless remote control, while watching the image on the TV monitor.
(3)Press the auto focus button [AUTO FOCUS] on the front panel or the auto focus button [AF] on the wireless remote control.
Note: The auto focus function works up to a height of approx. 10cm (3.9 in) above the stage surface when the zoom button [TELE] is set to the maximum.
Front panel
Wireless remote control
TELE ZOOM WIDE
Front panel
Wireless remote control
INPUTAF
- 19 -
