Elmo HV-8000SX instruction manual Video-in

	Name						Function			Reference
										Page
41.	Video-in	Video signal from this terminal is output through the analogue								P.22, P23
	Terminal 1	RGB-out terminal when the input selection is set at RGB1.
42.	Video-in	Video signal from this terminal is output through the analogue								P.22, P23
	Terminal 2	RGB-out terminal when the input selection is set at RGB2.
43.	Audio-in	Audio signal from this terminal is output through the audio-out								P.22, P23
	Terminal 1	terminal when the input selection is set at RGB1.
44.	Audio-in	Audio signal from this terminal is output through the audio-out								P.22, P23
	Terminal 2	terminal when the input selection is set at RGB2.
45.	DIP Switch	The functions can be switched as follows:
		[A] key: To switch the resolution of video output through the RGB-out terminal [RGB OUT].
			. SXGA		. XGA
		[B] key: To switch the TV output.
			. NTSC		. PAL
		[C] key: To switch the screen size of the TV output.
			. Over scan . Under scan
		[D] key: To initialize the setting of the network function to its factory setting.
			. Normal operation			. Initialization
			Key alignment and functions:
					A	B		C	D
			0	SXGA		NTSC		Over scan	Normal operation
			1	XGA		PAL		Under scan	Initialization

Note: Before switching the DIP switch key, be sure to turn OFF the power supply to the Presenter.

- 11 -