Elmo HV-8000SX instruction manual Rear Panel, DC12V, RS-232C

Rear Panel

31. Power Cord	33. 12VDC Out Terminal	35. RS-232C Terminal 40. Audio-out Terminal 43. Audio-in Terminal 1
Receptacle	[DC12V]	[RS-232C]
[AC IN]			41. Video-in Terminal 1

								AUDIO
								(L/R)1
AC IN	POWER
	ON	DC12V		VIDEO		L AUDIO R	RGB1
				RS-232C				AUDIO
				S-VIDEO		RGB OUT	RGB2
								(L/R)2
	OFF
		Ethernet	USB	MOUSE	OUTPUT		INPUT	ABCD

32. Power Switch 37. USB Terminal [USB]					42. Video-in Terminal 1
	[POWER]	34. Mouse Terminal [MOUSE] 38. Analogue RGB-out Terminal
			39. Vide-out Terminal	[OUTPUT.RGB OUT]
	36. Ethernet Terminal		[OUTPUT.S-VIDEO/VIDEO]		44. Audio-in Terminal 2
	[Ethernet]		S-Video (mini DIN 4P), Composite video (RCA pinjack) 45. DIP Switch
	Name		Function			Reference
						Page
31.	Power Cord Receptacle [AC IN]		Connected to the power cord connector.			P.19
32.	Power Switch [POWER]		To turn ON/OFF the power supply.			P.19
33.	12VDC Out Terminal		To output 12VDC and the image. Can be connected to			P.31
	[DC12V]		the LCD monitor (LM-5011N) (option) by using
			the LCD monitor connection cable (attached).
			Note: Do not connect the equipment other than LM-5011N.
34.	Mouse Terminal [MOUSE]		To connect the mouse (supplied accessory).			P.14
35.	RS-232C Terminal		To connect the RS-232C cable when controlling the			P.46
	[RS-232C]		main unit from the PC.
			Note: This terminal cannot be used when the USB terminal
			is used to control the main unit.
36.	Ethernet Terminal [Ethernet]		To connect the Ethernet cable when the network function is used.			P.37
37.	USB Terminal [USB]		To connect the USB cable (attached) to transfer the image or			P.32
			control the main unit with the CD-ROM “Image Mate” (attached).
			Note: This terminal cannot be used when the RS-232C is
			used to control the main unit.
38.	Analogue RGB-out Terminal		Image is output when this terminal is connected to RGB input			P.23
	[OUTPUT.RGB OUT]		equipment (e.g., liquid crystal projector, multi-sync monitor).
39.	Vide-out Terminal		Image is output when these terminals are connected			P.23
	[OUTPUT.S-VIDEO/VIDEO]		to the NTSC/PAL monitor (e.g., TV monitor).
	S-Video (mini DIN 4P)
	Composite video (RCA pinjack)
40.	Audio-out Terminal		Audio signal is output when this terminal is connected			P.23
			to audio-in equipment.

- 10 -