- 41 -
Operation of remote control
When the link [CONTROL] at the
quasi-moving image page is clicked,
the CONTROL page is displayed. At
the CONTROL page, the lighting can
be changed, the zoom can be adjusted,
the iris can be adjusted, the focus can
be adjusted, the color/B&W can be
switched, the posi/nega can be
switched, the aperture can be adjusted,
the contrast can be adjusted and the
color tone (RGB) can be adjusted, all
through remote control. Click the
button for intended operation. For the
adjustments of the zoom, iris, focus
and color tone, a preset amount
changes each time the button is
clicked.
FTP client function – Saving image files in the remote host byusing the image transfer button [IMAGE TRANSFER]When the image transfer button [IMAGE TRANSFER] on the operation panel is
pressed, the image file can be saved in the host on the network set in [FTP Client
Configuration]. To use this function, the FTP server of the host must be in operation at
the saving destination.
Also to use this function, the FTP clients must be set beforehand.
This Presenter provides two procedures for setting the FTP clients as follows:
• Connecting the Presenter from the host on the network through the Web browser.
• Connecting the Presenter from the host on the network through telnet.
Here, the setup procedure using the Web browser is described.
For the setup procedure using telnet, ask your distributor or nearest branch or service
office of ELMO.
Note: For some FTP servers, the image may be unable to be saved by using this
function. For the information of the applicable FTP servers, consult your dealer
or an authorized ELMO service center.