Remote Control (continued)
Using the remote control
CAUTION!
–Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
–Never mix batteries (old and new or carbon and alkaline, etc.).
–Batteries contain chemical substances; they should be disposed of properly.
A Open the battery compartment.
B Insert two batteries type R03 or AAA, following the indications
C Close the cover.
D Point the remote control directly at the remote sensor (IR) on the front panel.
Note:
Never place any objects between the remote control and this unit while operating.
E Select the desired function (for example u).
10
dvp3256_3258_3268_94_eng1.indd 10 |
