Connect USB fl ash drive
Cautions
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
1Connect a USB fl ash drive to the 
jack on this product.
Notes
•This product can only play/view MP3, DivX or JPEG fi les that are stored on a USB fl ash drive.
•Press 
to access the content and play the fi les.
Connect power
Cautions
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
socket.
» The product is ready to be set up for use.
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert two R03 or AAA batteries with correct polarity
3Close the battery compartment.
Find the correct viewing channel
1Press 
to turn on this product.
2Turn on the TV and switch to the correct
Select menu display language
Language OSD Language English
Subtitle
Video | DivX Subtitle | ||
Audio | Audio | : :Chinese | |
DVD Menu | :Chinese | ||
|
Rating
Misc
•The language options may vary from different regions.
1In stop mode, press 
.
2Press 
to select [Language] and then press
.
3Press 
and then 
to select a language.
4Press OK to confi rm.
5 Play
Play a disc
Cautions
•Do not place any objects other than discs into the disc compartment.
•Do not touch the disc optical lens inside the disc compartment.
1Press 
to open the disc compartment.
2Insert a disc with its label facing up.
3Press 
to close the disc compartment and start disc play.
8EN
