Connect to digital amplifier/receiver
DIGITAL AUDIO
INPUT
COAXIAL
1Connect a coaxial cable (not supplied) to:
•the COAXIAL jack on this product.
•the COAXIAL/DIGITAL input jack on the device.
Connect analogue stereo system
1Connect the audio cables to:
•the AUDIO OUT L/R jacks on this product.
•the audio input jacks on the device.
Connect a USB flash drive
1Connect a USB flash drive to the 
jack on this product.
Note
•This product can only play/view MP3, WMA or JPEG files that are stored on a USB flash drive.
•Press the 
button to access the content and play the files.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the product.
1 Connect the AC power cord to:
•this product.
•the wall socket.
»This product is ready to be set up for use.
4 Get started
Prepare the remote control
1Press and push the battery compartment to slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct polarity
3Push and slide back the battery compartment (see “3” in the illustration).
Note
•If you are not going to use the remote control for a long time, remove the batteries.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the TV input channel
1Press 
to turn on this product.
2Turn on the TV and switch to the video input channel (refer to the TV user manual on how to select the A/V input channel).
English
EN 6
