English
16
Selecting the color system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the color system of
the Disc, the TV and the DVD Player
should match.
1Press SETUP.
2Press 2 to select {VIDEO SETUP PAGE}.
3Press 3 4 to highlight {TV TYPE}, then
press 2.
4Press 3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Getting Started
5Select an item and press OK.
Follow the instructions shown on the
TV to confirm the selection (if any).
Tips:
Before changing the current TV
Standard setting, ensure that your TV
supports the selected TV Type system.
If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
1. ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
CANCELOK
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
CANCELOK
CHANGING NTSC TO PAL:
To reset to default TV color system
manually:
Wait for 15 seconds for auto recovery.
OR
1Press OPEN/CLOSE on the DVD player
to open the disc tray.
2Press numeric keypad 3 on the
remote control for few seconds.
The DVD background screen appears
on the TV.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
General Audio Video Preference
TY Type PAL
TV Display Multi
Progressive NTSC
Sharpness
Brightness
Contrast
Color
- - Video Setup Page - -
01-35_DVP4080_4060_4050_55_Eng 05/02/07, 9:37 AM16