English
19
Disc Operations

Basic playback controls

Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1During playback, press PLAY/PAUSE 2;
to pause playback and display a still
picture.
Sound will be muted.
2Press 4 to select the next picture frame.
3To resume normal playback, press
PLAY/PAUSE 2; again.
Selecting title/chapter/track/angle
Press PREV ¡ / NEXT to go to the
previous or next track/chapter.
In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track/angle.
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track/angle
number, then press OK.
The playback skips to the selected
title/chapter/track/angle.
Stopping playback
Press STOPÇ.
Tips:
Screen saver will start automatically if
the disc playback is stopped/paused for 5
minutes.
The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.

Playing discs

1Connect the power cords of the DVD
Player and TV (and any optional stereo or
AV receiver) to a power outlet.
2Turn on the TV power and set to the
correct Video In channel. (See page 14
“Setting up the TV”).
3Press POWER button to turn on the
DVD player front panel.
The DVD background screen appears
on the TV.
4Press OPEN/CLOSE button to open the
top leader and load in a disc, then press
the same button again to close the disc
tray.
Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
5Playback will start automatically. If not
press PLAY/PAUSE 2;.
If a disc menu appears on the TV, see
page 21“Using the Disc Menu”.
If the disc is locked by parental control,
you must enter your six-digit password.
(See page 31).
For more playback features, see pages 20-
24.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
01-35_DVP4080_4060_4050_55_Eng 05/02/07, 9:37 AM19