Philips DVP4090/55, DVP4060 quick start Introduction, Supplied accessories, Cleaning discs, Setup

Introduction

English

Supplied accessories

Composite video cable (yellow)

Audio cable (white, red)

AC power cable

Remote Control and

two AAA batteries

Cleaning discs

To clean a disc, use a micro fibre cleaning cloth and wipe the disc from the center to the edge in a straight line.

CAUTION!

Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static sprays intended for discs.

Since the optical unit (laser) of the DVD system operates at a higher power than regular DVD or CD players, cleaning CDs intended for DVD or CD players may damage the optical unit (laser).Therefore, refrain from using a cleaning CD.

Setup

Finding a suitable location

–Place the set on a flat, hard and stable surface. Do not place the set on a carpet.

–Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier).

–Do not put anything under the set (e.g., CDs, magazines).

–Install this system near the AC outlet and where the AC power plug can be reached easily.

Space for ventilation

–Place the apparatus in a location with adequate ventilation to prevent internal heat build up. Allow at least 10 cm (4.0”) clearance from the rear and the top of the set and 5cm (2.0”) from the left and right to prevent overheating.

5cm (2.0")

10cm (4.0") 10cm (4.0")

5cm (2.0")

Avoid high temperatures, moisture, water and dust

–Apparatus shall not be exposed to dripping or splashing.

–Do not place any sources of danger on the apparatus (e.g., liquid filled objects, lighted candles).

8

01-35_DVP4080_4060_4050_55_Eng 8 05/02/07, 9:37 AM