English

Troubleshooting

WARNING

Under no circumstances should you try to repair this unit yourself, as this invalidates the warranty. Do not open this unit as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking this unit for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

 

Solution

 

 

No power.

Press STANDBY-ON on the unit to turn on the

 

 

power.

 

Ensure that the AC outlet has power.

 

Disconnect the power cord from the power outlet

 

 

for a few minutes. Reconnect the power cord and try

 

 

to operate again as usual.

No picture.

Refer to your TV manual for correct Video In channel

 

 

selection. Change the TV channel until you see the

 

 

DVD screen.

 

If this happens when you turn on the progressive scan

 

 

feature, wait for 15 seconds for the auto recovery or

 

 

switch back to the default mode as below:

 

 

1) Press ç  to open the disc tray.

 

 

2) Press numeric keypad ‘1’ on the remote control.

 

If this happens after you set the color system, wait for

 

 

15 seconds for the auto recovery or switch back to

 

 

the default TV color system:

 

 

1) Press ç  to open the disc tray.

 

 

2) Press numeric keypad ‘3’ on the remote control.

Completely distorted picture

Check the video connection.

or black/white picture.

Ensure that the disc is compatible with this unit.

 

Sometimes a small amount of picture distortion may

 

 

appear. This is not a malfunction.

 

The disc is dirty. Clean the disc.

 

 

 

36

dvp5120k_55_eng1.indd 36

2008-04-21 10:23:29 AM

Page 36
Image 36
Philips DVP5120K/55 manual Troubleshooting, Problem Solution