Philips DVP5142 user manual Selecting the colour system that corresponds to your TV

Getting Started

Selecting the colour system that corresponds to your TV

This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.

- - Video Setup Page - -

TV Type	PAL
TV Display	Multi
Progressive	NTSC
Picture Setting
Component

NTSC TV

1Press SETUP.

2Press 2 to select {VIDEO SETUP PAGE}.

3Press 3 4 to highlight {TV TYPE}, then press 2.

4Press 3 4 to highlight one of the options below:

PAL – Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format.

Multi – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

5Select an item and press OK.

➜ Follow the instructions shown on the TV to confirm the selection (if any).

Helpful Hints:

–Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system.

–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.

CHANGING PAL TO NTSC:

1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD.

2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY.

OK CANCEL

CONFIRM AGAIN TO USE NEW TV

TYPE SETTING.

OK CANCEL

To reset to default TV colour system manually:

●Wait for 15 seconds for auto recovery.

OR

1Press OPEN CLOSE 0 on the DVD player to open the disc tray.

2Press numeric keypad ‘3’ on the remote control for few seconds.

➜The DVD background screen appears on the TV.

E n g l i s h

TIPS: The underlined option is the factory default setting.

Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.

19

001-45 DVP5140_Eng_02RC5 19 09/10/06, 11:09 AM