Philips MX5100VR/00, E9015ED Sorting and clearing TV channels manually, Setting the clock

→RF OUT CH 36

→ P01: 02 P06: 90

P02: 03 P07: 99

P03: 05 P08: 121

P04: 10 P09: 124

P05: 74 P10: 130

E9015ED_EN.qx3 03.7.29 6:32 PM Page 10

Setting Up your System

English

Sorting and clearing TV channels manually

After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (pro- gramme numbers) of the System.You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception.

The clock resets automatically

If you save a TV channel that transmits TXT/PDC on programme number ‘P01’, date and time will constantly be updated. As a result, time changes, i.e. daylight savings time, will be set automatically.

1Press VCR, then DISC/VCR MENU. MOVE

2 Press K/L to select 'TUNER SET UP' , then press B.

3 Press K/L to select 'MOVE' , then press B.

4 Press K/L to select the saved TV SELECT K L CHOOSE B channel that you want to change. END=EXIT

5Confirm with B.

6Move the selected channel with K/L to the programme num- ber you want to assign.

7Confirm with B.

8To assign other TV channels to a programme number, repeat steps 4 to 7.

9Confirm the assignment of the TV channel with MOVE menu.

10To exit the MOVE menu, press DISPLAY/STATUS/EXIT.

Setting the RF out channel (for VCR fea- tures)

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the System. Result:As soon as the System is switched on, the reception quality for this or several other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) frequency on the System.

1Press VCR, then DISC/VCR MENU.

2Press K/L to select 'INITIAL SET UP' , then press B.

What is RF out channel?

This electronic component in the System allows the device to transmit audio and video signals via the aerial cable.These signals can be received on a TV set just like TV channels.

What is RF out channel frequency?

This frequency or channel indicates the channel on which the audio or video signal is transmitted.

3Press K/L to select 'RF OUT' , then press B.

4Press B.

5Press K/L or numerical key pads to select a free (not allocat- ed) channel between channel 22 and 69 in your area.

6 Press B. SELECT K L CHOOSE B

7To end, press

DISPLAY/STATUS/EXIT.

END=EXIT

Setting the language (for VCR features)

You have the option of setting one of the displayed languages for the on-screen menu (OSD). However, the System display will only display English text regardless of this setting.

1Press VCR, then DISC/VCR MENU.

2	Press K/L to select 'INITIAL SET	SELECT K L
3	UP' , then press B.	→ ENGLISH
	Press K/L to select 'LANGUAGE',
		FRANÇAIS
	then press B.	ESPAÑOL
4	Select the desired language with	DEUTSCH
		ITALIANO
	K/L.	SVENSKA
5	To end, press	NEDERLANDS
		END=EXIT
	DISPLAY/STATUS/EXIT.

Setting the clock

If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually.

If a TV channel that transmits TXT/PDC (teletext/PDC) is stored under programme number 'P01', time/date will automat- ically be taken from the TXT/PDC information. (SMART CLOCK)

1Press VCR, then DISC/VCR MENU.

2Press K/L to select 'INITIAL SET UP' , then press B.

3Press K/L to select 'CLOCK' , then press B.

4Check the time in 'TIME'. If

	required, please change the time	TIME --:--
5	with numerical key pads.	DATE --/--/--
	Check 'DAY', 'MONTH' and 'YEAR'
6	in the same way.	SMART CLOCK [ON]
	Choose ‘SMART CLOCK’ ON or
	OFF with B.	END=EXIT

7To end, press

DISPLAY/STATUS/EXIT.

If you cannot get an interference-free picture and sound, switch the built-in modulator off.

Press L repeatedly until "--" appears next to "RF OUT CH" on the TV screen.

Then confirm with B. In that case, please connect your VCR to your TV with a Scart cable.

Decoder allocation (for VCR features)

Some TV channels transmit encoded TV signals which can only be viewed with a purchased or rented decoder.You can con- nect such a decoder to this System.The following function will automatically activate the connected decoder for the desired TV channel.

1Switch the TV on. If applicable, select the programme number for the System operation.

2Press K/L or numerical key pads to select the TV channel which you would like to allocate the decoder to.

3Press DISC/VCR MENU.The main menu will appear.

4Press K/L to select 'TUNER SET UP'.Then press B.

5	Press K/L to select 'MANUAL	MANUAL TUNING
6	TUNING'.Then press B.	PROG.	P55
	Press K/L to select 'DECODER'.
		CHANNEL	055
7	Press B to select 'ON' (Decoder	→ DECODER	[OFF]
	switched on).	SKIP	[OFF]

SELECT K L CHOOSE B

END=EXIT

How can I switch off the decoder?

Use B to select 'OFF' (Decoder switched off).

8To end, press DISPLAY/STATUS/EXIT.

The decoder has now been allocated to this TV channel.

10